Flange Insulation Kits HTG System
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Flange Insulation Kits
HTG System
TG Flange Insulation System
Description:
The TECSON HTG flange insulating kit is comprised of an insulating gasket,insulating sleeves, insulating washers and metal backing washers. The insulating gasket is constructed from serrated metal core ,faced with SONMAX 700, a proprie-
tary high temperature sealing material. Correct gasket location is ensured by the use of a SONMAX 700H ring, located around the periphery of the serrated metal core.
HTG high temperature flange insulation sets are specifically designed to create a seal and maintain electrical isolation across a wide range of seating stresses and flange classes in elevated temperature service. The SONMAX sealing material pushes the performance of the HTG insulation kit beyond the temperature capability of traditional insulation sets based on vermiculite or glass/epoxy sealing technology. SONMAX is
designated as fire safe, complying with the requirements of the oil and gas industry recognized API 6FB fire tests.
dvantages:
- Operational pressure : From Full vacuum to ASME B16.5 1500lb (26.0MPa)
- Operational temperature -200°C to 500°C
- SONMAX is suitable for sealing across a wide range of chemicals (pH 0-14) and sweet and sour gaseous and liquid
hydrocarbons.
- Standard core and washer metallurgy are NACE (MRO175) compliant.
- Dielectric Strength (ASTM D149) : 10.0 kV/mm
Application:
- Fine refinery
- Hydrocarbon Processing
- Heat Exchanger
- Power Station
Materials:
- Standard gasket core material: Stainless steel 316L, others can be supplied on requested
- Layer material: SONMAX 700
- Located ring material: SONMAX 700H
- Sleeve material: SONMAX 700
- Insulation Washer : SONMAX 700H
- Steel Washers : ZPS or HCS, please noted HCS can be used as insulation washer to instead SONMAX 700H wash- ers if necessary
Supply Specification:
- The gasket will be 5.5mm, with 4mm core and 0.75 x2 layer on both sides.
- Wall thickness of sleeve: 0.8mm
- Thickness of Washers: 3mm
Each HTG flange insulation set comprises:
insulating gasket : 1 per flange
Sleeves: 1 per bolt
Insulation Washers: 2 per bolt
Metallic Backing Washers: 2 per bolt
Ningbo Tecson Sealing Technology Co., Ltd. No. 1, Huapeng Rd, Cixi, Zhejiang, P.R.C
Phone: +86(574)23707877 Fax: +86(574)23707878 info@tecsonst.com
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. This is subject to change.
- Corrugated Gaskets 15 Pieces / (Min. Order)
- Isolating Flange 15 Pieces / (Min. Order)
- Monolithic Isolation Joints 15 Pieces / (Min. Order)
- Expanded Graphite Tape 15 Pieces / (Min. Order)
- Expanded PTFE Joint Sealant 15 Pieces / (Min. Order)
- O Rings 15 Pieces / (Min. Order)
- VITON Gasket 15 Pieces / (Min. Order)
- Stress Saver 15 Pieces / (Min. Order)
- PTFE Enveloped Gasket 15 Pieces / (Min. Order)
- Teflon Gasket 15 Pieces / (Min. Order)
- Corrugated Gaskets 15 Pieces / (Min. Order)
- Kammprofile Gaskets 15 Pieces / (Min. Order)
- Ring Joint Gaskets 15 Pieces / (Min. Order)
- Spiral Wound Gaskets 15 Pieces / (Min. Order)
- Phenolic With Neoprene Faced Gasket 15 Pieces / (Min. Order)
- LPG Gasket 15 Pieces / (Min. Order)
- HPG VCS Gasket 15 Pieces / (Min. Order)
- Isolating Flange 15 Pieces / (Min. Order)
- Monolithic Isolation Joints 15 Pieces / (Min. Order)